{"product_id":"sunlu-pla-plus-filament-1kg","title":"Sunlu PLA+ (PLA Plus) 3D Printer Filament 1.75mm 1KG","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSunlu PLA+ (PLA Plus) 3D Printer Filament 1.75mm 1KG\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSunlu PLA+ is a PLA-based filament for the prints you actually use — models, prototypes, jigs, brackets and parts that get handled rather than sat on a shelf. The formulation is designed for better toughness and layer adhesion than standard PLA, while printing with the same ease. Each spool holds 1 kg of 1.75 mm filament with a stated diameter tolerance of ±0.02 mm, and there are 30 colours to choose from.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cvideo controls=\"controls\" preload=\"none\" playsinline=\"\" poster=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/preview_images\/8c96151f362d4e2ba928e33af4eb251b.thumbnail.0000000000.jpg?v=1792825959\" style=\"width: 100%; height: auto;\"\u003e\u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/vp\/8c96151f362d4e2ba928e33af4eb251b\/8c96151f362d4e2ba928e33af4eb251b.HD-720p-2.1Mbps-98727870.mp4\" type=\"video\/mp4\"\u003eYour browser cannot play this video.\u003c\/source\u003e\u003c\/video\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eTougher than standard PLA\u003c\/strong\u003e — Sunlu formulates PLA+ for improved toughness and impact resistance, which is what you want on a part that gets dropped, screwed into or flexed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e±0.02 mm diameter tolerance\u003c\/strong\u003e — tighter than the usual ±0.03 mm, so extrusion stays consistent once your profile is dialled in.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eNeatly wound\u003c\/strong\u003e — the spool pays out smoothly instead of tangling or crossing over itself halfway through a long print.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eBuilt for faster printing\u003c\/strong\u003e — Sunlu advertises speeds up to 300 mm\/s with matched temperature and flow. What you actually reach depends on your printer, your hot end and your model.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003e30 colours\u003c\/strong\u003e on 1 kg spools, from the everyday Black and White through to Oak Wood, Sakura Pink and Roasted Chestnut Black.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003ePrints like PLA.\u003c\/strong\u003e No enclosure, no heated chamber, no hardened nozzle — a 50–60°C bed and a standard brass nozzle are enough.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/PLA_2.0_upgrade_13.jpg?v=1776219115\u0026amp;width=900\" alt=\"Sunlu PLA+ Filament — 1.75mm plus or minus 0.02mm tolerance, vacuum-sealed packaging and neatly wound filament\" width=\"900\" loading=\"lazy\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe Same Colour, Spool to Part\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eEvery colour below is the filament beside something printed with it, so you can judge the finished shade rather than the spool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/PLA_2_17.jpg?v=1776219116\u0026amp;width=450\" alt=\"Sunlu PLA+ Filament — black spool beside a model printed in the same filament\" width=\"450\" loading=\"lazy\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/PLA_2_23.jpg?v=1776219116\u0026amp;width=450\" alt=\"Sunlu PLA+ Filament — red spool beside a model printed in the same filament\" width=\"450\" loading=\"lazy\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/PLA_2_26.jpg?v=1776219116\u0026amp;width=450\" alt=\"Sunlu PLA+ Filament — blue spool beside a model printed in the same filament\" width=\"450\" loading=\"lazy\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/PLA_2_1.jpg?v=1776219116\u0026amp;width=450\" alt=\"Sunlu PLA+ Filament — green spool beside a model printed in the same filament\" width=\"450\" loading=\"lazy\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhy PLA+ and Not Plain PLA\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStandard PLA is the easiest filament to print and the easiest to snap. It is brittle at the layer line, which is fine for a display model and a problem for anything with a screw boss, a clip, a hinge or a thin wall that gets handled.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePLA+ keeps PLA’s printability — no enclosure, no warping, no fumes worth worrying about — while adding toughness and better layer adhesion. In practice that means a part that bends slightly before it fails rather than shearing along a layer. For a maker printing functional parts on an open-frame machine, it is the sensible default, and it costs very little more than plain PLA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIt is not a replacement for PETG, ABS or nylon. PLA+ still softens around 54°C, so it is the wrong choice for anything that lives in a parked car, near a motor, or outdoors in a UAE summer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/PLA_2.0_upgrade_1.jpg?v=1776219116\u0026amp;width=900\" alt=\"Sunlu PLA+ Filament — a collage of parts printed in PLA+, from a model car and vases to brackets and tools\" width=\"900\" loading=\"lazy\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePrinting Guidance\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStandard printing\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e205–215°C at 50–100 mm\/s\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHigher-speed printing\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e215–245°C at 100–200 mm\/s\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBuild plate\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e50–60°C; Sunlu’s table specifies use with glue\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDrying\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e50°C; Sunlu does not state a duration\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStorage\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBelow 20% RH, sealed with desiccant\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAmbient\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRoom temperature\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eA note on temperatures.\u003c\/strong\u003e Sunlu’s own sources disagree: the printed page table gives the ranges above, while the site’s product data lists 195–205°C and 205–220°C. We have published the page table. \u003cstrong\u003eFollow the label on the spool you receive\u003c\/strong\u003e, start from your slicer’s PLA+ profile, and tune temperature, cooling and flow from there.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMaterial\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePLA+ \/ PLA Plus\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFilament diameter\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1.75 mm ±0.02 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNet filament weight\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 kg per spool\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eApproximate length\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e330 m per 1 kg spool\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDensity\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1.21 g\/cm³\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eVicat softening temperature\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e54°C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHeat deflection temperature\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e56 ±3°C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMelting point\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e164°C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMelt flow rate\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8.3 ±2 g\/10 min\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTensile strength\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e46 ±5 MPa\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eElongation at break\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e10 ±2.5%\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFlexural strength\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e83 ±5 MPa\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFlexural modulus\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2750 ±200 MPa\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNotched IZOD impact, XY\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e10 ±3 kJ\/m²\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThese are Sunlu’s published reference values. Finished-part properties depend on print orientation, geometry, walls, infill and your printer — and Sunlu does not publish the full test methods, so treat these as indicative rather than as design limits.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAbout the Spool\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSunlu has shipped several spool generations for this filament, and the manufacturer states that more than one design may be supplied:\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFirst generation\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e196 × 72.5 × 61 mm · 70°C · not reusable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSecond generation\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e195 × 63 × 57 mm · 90°C or 110°C · reusable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThird generation\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e200 × 55 × 68 mm · 90°C or 110°C · reusable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWe cannot promise which spool design arrives\u003c\/strong\u003e, so if you need a specific bore diameter for an AMS or a particular dry box, ask us before you order and we will check the stock on the shelf. The temperatures above describe the spool, not the filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhat’s in the Box\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eOne spool holding 1 kg of Sunlu PLA+ filament, vacuum-sealed. Confirm any included extras against what you receive — Sunlu’s packaging varies by batch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the printer, and the printed models shown in Sunlu’s photography and video, which are demonstration pieces.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCompatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSunlu PLA+ suits most FDM printers built for 1.75 mm PLA-family filament — Bambu Lab, Creality, Prusa, Snapmaker, Anycubic, Elegoo and the rest. No enclosure or hardened nozzle is needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCheck the spool fits your feeder.\u003c\/strong\u003e If you run an enclosed spool holder, an AMS-style unit or a dry box, measure against the spool dimensions above and allow for the filament path, because the bore diameter differs between generations.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWhy Buy from Omnimakers\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHeld in UAE stock.\u003c\/strong\u003e Days, not weeks — and filament that has not spent a month in a humid shipping container on the way to you.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003ePriced in AED.\u003c\/strong\u003e No customs surprise at the door, no card conversion fee.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWe print on what we sell.\u003c\/strong\u003e Profile and settings questions get answered from machines on the bench rather than a spec sheet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eSupport in your timezone\u003c\/strong\u003e, from people who print.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eOne supplier for the whole setup\u003c\/strong\u003e — printer, plates, spares and filament on one invoice.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhat is the difference between Sunlu PLA+ and standard PLA?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePLA+ is PLA with an additive package for better toughness and layer adhesion. It prints at similar temperatures and needs no enclosure, but a finished part is less brittle — which matters for anything with a clip, a screw boss or a thin wall. Sunlu publishes notched IZOD impact of 10 ±3 kJ\/m² for PLA+.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eIs this PLA+ or PLA+ 2.0?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis listing is Sunlu PLA+ (PLA Plus). Sunlu sells PLA+ 2.0 as a separate product with its own specification, and it is not what is sold here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhat temperature should I print it at?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSunlu’s page table gives 205–215°C for 50–100 mm\/s and 215–245°C for 100–200 mm\/s, with a 50–60°C bed. Sunlu’s own product data elsewhere lists lower ranges, so check the label on your spool and start from your slicer’s PLA+ profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eCan I really print at 300 mm\/s?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSunlu advertises up to 300 mm\/s. That is a ceiling on an ideal model with a high-flow hot end, not a setting to start from. Most printers run PLA+ well in the 100–200 mm\/s band with the matching temperature.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDo I need an enclosure or a heated chamber?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. PLA+ prints on an open-frame printer with a 50–60°C bed. It does not warp the way ABS or ASA does.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. PLA+ is not abrasive. A standard brass nozzle is fine — hardened steel is for carbon- and glass-filled filaments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWill it fit my AMS or enclosed spool holder?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCheck first. Sunlu has shipped three spool generations with different bore diameters (72.5 mm, 63 mm and 55 mm) and says more than one design may be supplied. If a specific bore matters to you, ask us and we will check the stock before you order.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eIs the spool reusable?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe second- and third-generation spools are reusable; the first generation is not. Because Sunlu may supply more than one design, we do not promise a reusable spool on this listing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDoes it need drying before use?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNot usually, straight from the vacuum bag. If it has been open a while and you see stringing or popping, dry it at 50°C — Sunlu does not publish a duration, and 4–6 hours is the usual figure for PLA. Store it below 20% RH with the desiccant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow hot can a finished part get?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNot very. Vicat softening is 54°C and heat deflection is 56 ±3°C, so a PLA+ part will deform in a parked car in a UAE summer, near a motor, or in direct sun. Use PETG, ABS or ASA for anything that gets warm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eIs it suitable for outdoor parts?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNo. PLA-family filament degrades under UV and heat. For outdoor use, ASA is the right material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow much filament is on the spool?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 kg net, roughly 330 m at 1.75 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eWhich colour should I choose for a functional part?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAny of them print the same. Darker colours hide layer lines better on a visible part; lighter colours show detail better in photographs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHow should I store it between prints?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eReseal it with the desiccant in the original bag or a dry box, below 20% RH. PLA+ is less moisture-sensitive than PETG or nylon, but a spool left open for months will print noticeably worse.\u003c\/span\u003e\u003c\/p\u003e","brand":"Sunlu","offers":[{"title":"Spool \/ Black \/ 1kg","offer_id":57810174542169,"sku":"SU-FIL-PLA-PLU-BLK-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Midnight Black \/ 1kg","offer_id":57810174574937,"sku":"SU-FIL-PLA-PLU-MBLA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Bone White \/ 1kg","offer_id":57810174706009,"sku":"SU-FIL-PLA-PLU-BWHI-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Gray \/ 1kg","offer_id":57810174738777,"sku":"SU-FIL-PLA-PLU-GRA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Red \/ 1kg","offer_id":57810174771545,"sku":"SU-FIL-PLA-PLU-RED-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Magenta \/ 1kg","offer_id":57810175000921,"sku":"SU-FIL-PLA-PLU-MAGA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Coffee Brown \/ 1kg","offer_id":57810175066457,"sku":"SU-FIL-PLA-PLU-CBROA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Oak Wood \/ 1kg","offer_id":57810175099225,"sku":"SU-FIL-PLA-PLU-OWOO-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Cyan \/ 1kg","offer_id":57810175131993,"sku":"SU-FIL-PLA-PLU-CYA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Lavender Purple \/ 1kg","offer_id":57810175164761,"sku":"SU-FIL-PLA-PLU-LPURA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Olive Green \/ 1kg","offer_id":57810175197529,"sku":"SU-FIL-PLA-PLU-OGRE-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Sunny Orange \/ 1kg","offer_id":57810175230297,"sku":"SU-FIL-PLA-PLU-SORAA-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Vivid Yellow \/ 1kg","offer_id":59681280459097,"sku":"SU-FIL-PLA-PLU-VYEL-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true},{"title":"Spool \/ Beige \/ 1kg","offer_id":59681280491865,"sku":"SU-FIL-PLA-PLU-BEI-1.75mm-1kg-SPL","price":73.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/6758\/1017\/files\/Midnight_Black_PLA_2.0.jpg?v=1776219115","url":"https:\/\/www.omnimakers.com\/products\/sunlu-pla-plus-filament-1kg","provider":"Omnimakers","version":"1.0","type":"link"}